# Configuration

Follow these steps to start the configuration process:

1. Log in to your Antares account console page<br>

   <figure><img src="https://content.gitbook.com/content/7cujmJ5QHdJaAjH815aZ/blobs/Z1TcB1yjekHaHEo6ksDb/arduino%20uno%201.png" alt=""><figcaption></figcaption></figure>
2. In the example source code send data library Arduino Uno Ethernet Shield, change the accesskey, application name and device name with your own.

<figure><img src="https://content.gitbook.com/content/7cujmJ5QHdJaAjH815aZ/blobs/T10TcOdMbKVA1SyIVQoN/gambar%20(10)%20(1).png" alt=""><figcaption></figcaption></figure>

3. In the Arduino IDE, configure the Arduino Uno as the board you will be using. Click **Tools > Board > Arduino Uno.**
4. In the Arduino IDE, configure the Port according to the Arduino Board you are using. Click **Tools > Port > COM.**